How To Sound Older On A Mic

Return to site

How To Sound Older On A Mic

The Blue Yeti USB Microphone is highly popular, but its sensitivity can overwhelm you. Photo (CC) by LTD Team
The drawback to Yeti Blue USB Microphones for podcastingWatch How To Make Your Voice Sound Deep from the pioneers of how to videos. This guide will give you step-by-step instructions to ensure you get good at acc.

Yeti Blue microphones are widely popular for podcasting and home sound recording. They do have a big drawback of being overly sensitive. They pick up too much background noise even when the gain is turned way down. I know because I bought one for my own podcasting and video streaming and had a hard time getting good sound with it.
Older Mac Systems have 3.5mm jack to connect a headphone or mic for voice input and listening music. We recommend you to use an external microphone for best quality audio recording on your Mac System. Reverb and Delay is also a really good way to make it sound as if the recording is being played in a room. A nice long delay will give that cool echo you might hear in those old recordings of big speeches. If you put the reverb/delay before the EQ, it can even emulate the sound of your 'lo-fi' microphone recording in a large space. To make mic as loud as possible - discord - https://discord.gg/mqAvKBu.
The Wrong AdviceMost of the advice I found online says to turn the gain knob on the Yeti down to the absolute minimum. That avoids picking up too much background sound, but then the audio is really quiet and almost unusable. The wrong advice says to amplify that sound at the computer or in your software.
How to make a new imovie project. The resulting sound I got using this advice was what I would describe as hollow.
The Contrarian Advice that Works BetterHow To Sound Older On MicA few contrarians online say to turn the gain knob higher and turn down input level at the computer or software. That worked for me. The sound was much richer, and without picking up all the background noise.
The gain knob is the top one on the back of the Yeti. Most advice says turn it as far down as you can. That advice is wrong. Photo (CC) by LTD Team
I plugged my best set of headphones directly into the Yeti so I could monitor the sound while I made adjustments.
I turned the gain knob on the back of the Yeti all the way up. I could hear EVERYTHING.
I opened the Windows Sound Settings by typing 'sound settings' into the Windows search box.
In the Sound Settings, I scrolled down to the Input devices.
I made sure the Yeti mic was selected, then clicked Device Properties.
I adjusted the volume down to around 50.
How to install a zip file on pc. Much better!
I adjusted the two settings a little bit each way, until my voice sounded the best I could get and I couldn't hear my wall clock ticking.
I ended up with the Yeti gain knob down about a quarter of the way and the Windows volume set at 75.
You don't have to do it every timeI made these changes one time in Sound Settings, and now Windows seems to remember for me. Whenever I hook or plug in my Yeti, it's ready to go. I don't have to do anything extra.
New to SmallBizSurvival.com? Take the Guided Tour. Like what you see? Get our updates. 
If you're interested in small town small business, feel free to check out some of our best stuff: 
Zoom Towns: attracting and supporting remote workers in rural small towns- December 10, 2020
In an economic crisis, spend your brainpower before your dollars- November 25, 2020
Video: How to fill empty car dealership buildings for the holidays- November 6, 2020
How has 2020 changed the challenges rural small towns face? Tell us here- October 20, 2020
The Idea Friendly Method to surviving a business crisis- October 6, 2020
Join me for the Rural Renewal Symposium online Oct 13- September 26, 2020
Cheap placemaking idea: instant murals- September 11, 2020
Refilling the rural business pipeline- July 7, 2020
Huge vacant buildings: grants to renovate?- June 9, 2020
Economic self defense for small towns - June 7, 2020
The Blue Yeti USB Microphone is highly popular, but its sensitivity can overwhelm you. Photo (CC) by LTD Team
The drawback to Yeti Blue USB Microphones for podcastingYeti Blue microphones are widely popular for podcasting and home sound recording. They do have a big drawback of being overly sensitive. They pick up too much background noise even when the gain is turned way down. I know because I bought one for my own podcasting and video streaming and had a hard time getting good sound with it.
The Wrong AdviceMost of the advice I found online says to turn the gain knob on the Yeti down to the absolute minimum. How to do the screen shot. That avoids picking up too much background sound, but then the audio is really quiet and almost unusable. The wrong advice says to amplify that sound at the computer or in your software.
The resulting sound I got using this advice was what I would describe as hollow.
The Contrarian Advice that Works BetterA few contrarians online say to turn the gain knob higher and turn down input level at the computer or software. That worked for me. The sound was much richer, and without picking up all the background noise.
The gain knob is the top one on the back of the Yeti. Most advice says turn it as far down as you can. That advice is wrong. Photo (CC) by LTD Team
I plugged my best set of headphones directly into the Yeti so I could monitor the sound while I made adjustments.
I turned the gain knob on the back of the Yeti all the way up. I could hear EVERYTHING.
I opened the Windows Sound Settings by typing 'sound settings' into the Windows search box.
In the Sound Settings, I scrolled down to the Input devices.
I made sure the Yeti mic was selected, then clicked Device Properties.
I adjusted the volume down to around 50.
Much better!
I adjusted the two settings a little bit each way, until my voice sounded the best I could get and I couldn't hear my wall clock ticking.
How To Mic A PianoI ended up with the Yeti gain knob down about a quarter of the way and the Windows volume set at 75.

Yeti Blue microphones are widely popular for podcasting and home sound recording. They do have a big drawback of being overly sensitive. They pick up too much background noise even when the gain is turned way down. I know because I bought one for my own podcasting and video streaming and had a hard time getting good sound with it.
Older Mac Systems have 3.5mm jack to connect a headphone or mic for voice input and listening music. We recommend you to use an external microphone for best quality audio recording on your Mac System. Reverb and Delay is also a really good way to make it sound as if the recording is being played in a room. A nice long delay will give that cool echo you might hear in those old recordings of big speeches. If you put the reverb/delay before the EQ, it can even emulate the sound of your 'lo-fi' microphone recording in a large space. To make mic as loud as possible - discord - https://discord.gg/mqAvKBu.
The Wrong AdviceMost of the advice I found online says to turn the gain knob on the Yeti down to the absolute minimum. That avoids picking up too much background sound, but then the audio is really quiet and almost unusable. The wrong advice says to amplify that sound at the computer or in your software.
How to make a new imovie project. The resulting sound I got using this advice was what I would describe as hollow.
The Contrarian Advice that Works BetterHow To Sound Older On MicA few contrarians online say to turn the gain knob higher and turn down input level at the computer or software. That worked for me. The sound was much richer, and without picking up all the background noise.
The gain knob is the top one on the back of the Yeti. Most advice says turn it as far down as you can. That advice is wrong. Photo (CC) by LTD Team
I plugged my best set of headphones directly into the Yeti so I could monitor the sound while I made adjustments.
I turned the gain knob on the back of the Yeti all the way up. I could hear EVERYTHING.
I opened the Windows Sound Settings by typing 'sound settings' into the Windows search box.
In the Sound Settings, I scrolled down to the Input devices.
I made sure the Yeti mic was selected, then clicked Device Properties.
I adjusted the volume down to around 50.
How to install a zip file on pc. Much better!
I adjusted the two settings a little bit each way, until my voice sounded the best I could get and I couldn't hear my wall clock ticking.
I ended up with the Yeti gain knob down about a quarter of the way and the Windows volume set at 75.
You don't have to do it every timeI made these changes one time in Sound Settings, and now Windows seems to remember for me. Whenever I hook or plug in my Yeti, it's ready to go. I don't have to do anything extra.
New to SmallBizSurvival.com? Take the Guided Tour. Like what you see? Get our updates. 
If you're interested in small town small business, feel free to check out some of our best stuff: 
Zoom Towns: attracting and supporting remote workers in rural small towns- December 10, 2020
In an economic crisis, spend your brainpower before your dollars- November 25, 2020
Video: How to fill empty car dealership buildings for the holidays- November 6, 2020
How has 2020 changed the challenges rural small towns face? Tell us here- October 20, 2020
The Idea Friendly Method to surviving a business crisis- October 6, 2020
Join me for the Rural Renewal Symposium online Oct 13- September 26, 2020
Cheap placemaking idea: instant murals- September 11, 2020
Refilling the rural business pipeline- July 7, 2020
Huge vacant buildings: grants to renovate?- June 9, 2020
Economic self defense for small towns - June 7, 2020
The Blue Yeti USB Microphone is highly popular, but its sensitivity can overwhelm you. Photo (CC) by LTD Team
The drawback to Yeti Blue USB Microphones for podcastingYeti Blue microphones are widely popular for podcasting and home sound recording. They do have a big drawback of being overly sensitive. They pick up too much background noise even when the gain is turned way down. I know because I bought one for my own podcasting and video streaming and had a hard time getting good sound with it.
The Wrong AdviceMost of the advice I found online says to turn the gain knob on the Yeti down to the absolute minimum. How to do the screen shot. That avoids picking up too much background sound, but then the audio is really quiet and almost unusable. The wrong advice says to amplify that sound at the computer or in your software.
The resulting sound I got using this advice was what I would describe as hollow.
The Contrarian Advice that Works BetterA few contrarians online say to turn the gain knob higher and turn down input level at the computer or software. That worked for me. The sound was much richer, and without picking up all the background noise.
The gain knob is the top one on the back of the Yeti. Most advice says turn it as far down as you can. That advice is wrong. Photo (CC) by LTD Team
I plugged my best set of headphones directly into the Yeti so I could monitor the sound while I made adjustments.
I turned the gain knob on the back of the Yeti all the way up. I could hear EVERYTHING.
I opened the Windows Sound Settings by typing 'sound settings' into the Windows search box.
In the Sound Settings, I scrolled down to the Input devices.
I made sure the Yeti mic was selected, then clicked Device Properties.
I adjusted the volume down to around 50.
Much better!
I adjusted the two settings a little bit each way, until my voice sounded the best I could get and I couldn't hear my wall clock ticking.
How To Mic A PianoI ended up with the Yeti gain knob down about a quarter of the way and the Windows volume set at 75.
You don't have to do it every timeI made these changes one time in Sound Settings, and now Windows seems to remember for me. Whenever I hook or plug in my Yeti, it's ready to go. I don't have to do anything extra.
New to SmallBizSurvival.com? Take the Guided Tour. Like what you see? Get our updates. 
How To Test A MicIf you're interested in small town small business, feel free to check out some of our best stuff: 
Zoom Towns: attracting and supporting remote workers in rural small towns- December 10, 2020
In an economic crisis, spend your brainpower before your dollars- November 25, 2020
Video: How to fill empty car dealership buildings for the holidays- November 6, 2020
How has 2020 changed the challenges rural small towns face? Tell us here- October 20, 2020
The Idea Friendly Method to surviving a business crisis- October 6, 2020
Join me for the Rural Renewal Symposium online Oct 13- September 26, 2020
Cheap placemaking idea: instant murals- September 11, 2020
Refilling the rural business pipeline- July 7, 2020
Huge vacant buildings: grants to renovate?- June 9, 2020
Economic self defense for small towns - June 7, 2020